| GENERAL |
|
| Model |
Three Operation Modes
- Underslung Mode
- Upright Mode
- Briefcase Mode
Built-in independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported
|
| MECHANICAL & ELECTRICAL CHARACTERISTICS |
|
| Working Current |
- Static current: 300mA (@16V)
- Dynamic current: 600mA (@16V)
- Locked motor current: Max 10A (@16V)
|
| Weight |
4.20kg (9.26lbs) fully loaded with handlebar |
| Gimbal Dimensions |
620mm(W) x 280-380mm (D)x 500mm(H) |
| PERIPHERAL |
|
| Camera Tray Dimensions |
- Maximum depth at center of mass on camera base plate: 140mm
- Maximum height measured from top of camera base plate: 225mm
- Maximum width: 195mm
|
| Accessory Power Connections |
12V regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1 |
| GCU Input Power |
4S Ronin Battery |
| Connections |
2.4GHz Remote Control, Bluetooth, USB 2.0 |
| PC Assistant Software Requirements |
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit) |
| Mobile Assistant Software Requirements |
iOS version 6.1 or above Mobile Device iPhone 4s, iPhone 5, iPhone 5s, iPod touch 5 , iPad 3, iPad 4, iPad mini |
| WORKING PERFORMANCE |
|
| Load Weight (Reference Value) |
16lbs (7.25kg) |
| Angular Vibration Range |
± 0.02° |
| Maximum Controlled Rotation Speed |
- Pan axis: 90°/s
- Tilt axis: 100°/s
- Roll axis: 30°/s
|
| Controlled Rotation Range |
- Pan axis control: 360°
- Tilt axis control: +45° to -120°
- Roll axis control: ± 25°
|
| Mechanical Endpoint Range |
- Pan axis: 360°
- Tilt axis: +110° /-170°
- Roll axis: ± 110°
|